Samsung GT-I9305 Touch Screen Problem Solution Jumper ways
Samsung I9305 Galaxy S III touchscreen connector Jumper Problem Solution Forms
This solution can help repair the hardware on the Samsung I9305 Galaxy S3 with no problem working touch screen. If the digitizer touch screen is broken or cracked Samsung GT-I9305 Galaxy S III, you may have it replaced with a new glass digitizer touch screen. Just look disassembly guide Samsung GT-I9305 adequately dismantle the phone.
The first step you should do first is to replace the touch screen. Is the touch screen replacing solve the problem or not. If the problem is not solved try the next step.
The second step you should do is check for a dirty connector touchscreen or corrosion, if any dirty or corrosive opportunity to clean, and then check the connection lines with a touch screen like the picture below. Check the track one by one if there is a pioneering attempt to build bridges.
After this assembly look Samsung GT-I9305 in the mother board and if you find some damage carbon oxide or water, then it can also cause a problem Touchscreen Samsung I9305 Galaxy S III to address and resolve Touch screen problems Samsung GT-I9305 Galaxy S3 clean all the carbon oxide and cleaner electronics and applying hot air to dry.
The above solution showed a chip Touch accelerometer used to detect the orientation, direction detection module address multiaccess touch plate. If the chip does not work touch screen is damaged and remains insensitive.
Samsung GT-I9305 Touch Problem Solving repair fails Samsung I9305 Galaxy S III Touch Solution
0 comments Blogger 0 Facebook
Post a Comment